Відео

This old video was so helpful to replace my old cords. A million thanks dear friend!

Thank you so much 😊

LOVE your shirt

Hi. Thanks for the video. If I want to replace all the sliders at the same time, how do I go about doing them? Is there a lever to undo or do I need to unscrew something. Thank you.

Thank you

This looks tricky, but I'll give it a try. What bothers me is you never showed the cord ends after you were done. Is it a loop to go around a tension pulley like my system? Or two separate cords to open and close? And if a loop, how do you ensure that the length fits the tension pulley ?

THANK YOU, you just saved me a lot of frustration! I'm doing this for my neighbor.

Thank you so much for making this video. I thought I was going to have to buy a new traverse curtain rod, but when I watched this, I bought a $5 replacement cord and gave it a shot. I had to start over a couple of times, but your instructions are so precise, that even I, one of the most un-handy people around, was able to get it eventually. 😁 You did the entire job in 10 minutes, but it took me about 1-1/2 hours to finish. Thanks for the tutorial! Much appreciated.

Handy tips: 1. use Blue Tac on the tip of the cord to keep it tidy. Once your job is done, remove the blue tac. 2. Alternatively, use a gas lighter to melt the tip of the cord. This way the tip of the cord doesn't tear as you work with it.

cord, teething puppy, ticked off ! ugh. thanks for this video

Thanks Vee, so helpful for our new home.

This is the best video I've watched! So much easier than so many I've watched, and right to the point! Thank you so much.

God sent...thank you SOOOO MUCH!!

Thank you very much. Buying a $5.50 cord was much more affordable than replacing our ancient (60+ years) traverse rod.

Thanks so much, this is so helpful. Really appreciate your time taken to help others 🤩🙏🏼👍🏻🇦🇺

Finally,someone who talked you through the process clearly with helpful graphics,thank you

How to place rod carriers in the centre of the rod?

Stud!

Thank you so much!

Brilliant!!

My curtain cord came out from the track and stuck with roller when pulling the cord. How to put back the cord into the track please?? Thanks

The best demonstrated. Thanks 😊 🙏

Hi from the Adelaide Hills, South Australia. Just to say many, many thanks for your great instruction video. I spent a lot of time trying to get the darned traverse cord restrung. You helped me do it in just a few minutes. Best wishes and regards, DavidB.

beautiful instructional video. Thank you!

You are one of the most beautiful things in 2020 Thank you very much you made this video in 2008 but till 2020 it`s the best and maybe the only video teaches us how to fix a Traverse Curtain Rod in this clear easy way0 From PALESTINE thank you very much

I was having all kinds of trouble then I came across this video AND I DID IT ! THANKS

THIS IS THE MOST USEFUL VIDEO ON UA-cam!!! THANK YOU THANK YOU THANK YOUR

Very clear explanation but it would be necessary to remove the entire track from under its pelmet to replace the cord because it would be too hard to thread the cord through etc working from such and awkward angle, with the pelmet etc, standing on a chair etc, plus I am scared of heights. Easier to simply get an expert to do this job for me.Trouble is, finding one who will even do such a small job. I approached some but they would only fo it if I had toreplace all cords on all my windows, to make it worth their while. I only needed one replaced, so the broken cord is still that way, after a couple of years, unable to find anybody who can do this little job where I live. Anybodyvwould think there was no unemployment, no small businesses in the window coverings industry in need of a dollar, after the bad economic impact of Covid on small businessesin Australia.

We moved in to this house. Took off the traverse rod for painting. Can’t figure out how to make the pulley system work again. Can we Facetime you? Can you please help us? You are very good at explaining.

Hey my transverse rod was “ inside “ a normal looking rod (?) I bought house w it - it’s strong broke

What's name is it? Please. ..

Very good video! Got me up and running in no time! Incidentally, I was trying to place where I heard the accent before. It was the Al Pacino character in Scent of a Woman! Hooo-ahhh!

A good video kept to the basics and was very well done. Hat off to you Sir, you did well. Thank you!!

Thank you that was very helpful. I have my grandmother's custom made curtains and I was confused on the rod. 😊

Thank you! I had an old rod I'd never used before whose cord was in 2 pieces. I decided to try knotting the first side of the main traverse and follow his directions to the 2nd traverse. Then I knotted it in the left side and knotted the new cord on the right side. Continued as specified and then knotted the 2nd cord on the right side of the 1st traverse gathering up all the slack. It worked!!

Hi, I want to replace the cord on my Integra iPole Glyda curtain pole, as the cord supplied hangs just 1 metre from the pole. Can you recommend what type of cord should be used? Does it matter whether it's Nyloñ or Polyester? Does it have to be braided or what? Thanks for you advice

Awesome video thanks

Thank you thank you.

Thank you 🛠🛠🛠🛠🛠🛠🛠🔩🔩🔩🔩🔩🔩

No, no no, I need instructions for a one way carrier. NOT a split carrier. Total waste of time watching this. UNLESS you are stringing a split carrier.

Very helpful, thanks

Thank you very much for posting this tutorial. It enabled me to fix the set of drapes I had broken last year at my brothers house. Saving me atleast $35.00.

Thank you

Really, really complete and helpful.

Short and to the point. Very helpful-thank you for putting this out.

May I know what kind of string you used for this?

Use a tweezer to pull the cord.

I only had a vague idea what a traverse rod was but it sounded like what I was looking for. I'm thankful you decided to make this informative video.

Use a lighter to melt the ends of string to keep them from fraying, that way you don't have to keep trimming them.

Best instruction video for restringing an old rod like I had. Thank you!